Cold work tool steel 7CrSiMnMoV_CH1_HMD5 ---- flame hardening is the tag of this steel grade.
Equivalent Grade of 7CrSiMnMoV Steel
Standard | Grade |
AISI/SAE | - |
W.Nr/DIN | - |
JIS | CH-1,~HMD5 |
GB | 7CrSiMnMov |
Chemical Composition (%)
C | Si | Mn | Cr | Mo | V |
0.65-0.75 | 0.85-1.15 | 0.65-1.05 | 0.90-1.20 | 0.20-0.50 | 0.15-0.30 |
Heat Treatment of 7CrSiMnMoV / CH1 Steel
Annealing: 860 to 840℃, slow cooling in furnace 3 to 4 hrs, down to approx. 550℃, cooling in air. Hardness after annealing: max. 241HB.
Hardening: flame hardening
Properties of 7CrSiMnMoV / CH1 Steel
Good hardenability, high strength & good toughness, small thermal deformation.
Applications of 7CrSiMnMoV / CH1 Steel
Big size insert fixing die, deep drawing die, stamping die, blanking die, widely useing replac the O1 or D3, an efficient solution.
Available Size of steel 7CrSiMnMoV / CH1 Steel
Round: | Dia 12-50mm | hot rolled | ||
Dia 50-600mm | forged | |||
Flat/Square: | Thickness | 10-40mm | hot rolled | |
20-350mm | hot forged | |||
Width | 1000mm max |
Get quotation about tool steel 7CrSiMnMoV round/flat bars,plate and forged block,please contact us.